-	Preheat the heat press to 375F (temperatures very depending upon equipment)
-	Set the pressure to high (60-80 psi)
-	For T-shirt applications, press the T-shirt alone for 5 seconds to eliminate wrinkles
-	Place the transfers with imaged side face down on the shirt, press for approximately 20 seconds (time may vary with equipment and substrate to be transferred)
-	Peel the release liner while ward after transferring (approx 5-10 seconds after transfer)

-	The following recommendations will help to minimize fading:
	- Do not use chlorine bleach
	- Turn the T-shirt inside out when washing
	- Use cold water
	- Dry at warm tumble dry